Add it to your cut list, or continue with the pieces and files already included.
CUT TO YOUR DIMENSIONS
BRASS / ROUND BARIllustrative material image
LIVE DIMENSION VIEWROUND BAR
Brass Round Bar
See your specification take shape.
Dimension labels are on. Enter dimensions to see their labels.
MADE FOR YOUR CUT LIST
The right metal. Your exact dimensions.
From a single part to a mixed-material project. Configure each cut, then bring it all together in one reviewed quote.
Custom cut sizesMultiple parts, one requestReviewed specifications
CUT-TO-SIZE METAL
C360 Brass Round Bar
Request solid C360 brass round bar for turned blanks. Specify diameter, length and machining allowance, with finish and material restrictions clearly identified.
Attach a PDF, DXF or STEP file. You can request a review without configuring individual pieces.
How your quote works +
Add one or more cuts, share your requirements and tell us where to deliver. We review material, cutting and freight before sending a quote.
Dimensions & material weight +
Dimensions describe your requested section and cut length. Standard sections and feasible cuts are confirmed during review. Include any tolerance in project details. Weight is theoretical, uses ideal section geometry and excludes corner radii, packaging and cutting loss. The preview is a schematic, not a manufacturing drawing.
PROJECT CONTENTS
Your cut list
Cut lines are saved in this browser. Only added pieces are included in your request.
What to include in your request
If the finished part contacts a regulated medium or has composition restrictions, include the actual material requirement for review.
Material
Brass
Profile
Round Bar
Grade references
C360 — confirm grade and condition in the quote
Dimensions
Diameter, cut length
Units
Inches or millimeters; decimals or fractions
Supply & cutting
Subject to review; no live-stock or tolerance guarantee
Theoretical geometry only. Actual dimensions, tolerances and cutting require supplier review.
01
Turning creates relationships around an axis
Turning describes a machining process organized around a rotating workpiece and its axis. For brass knobs and spacers, circular profiles, shoulders, and end faces can form a connected set of features rather than unrelated dimensions. A hidden attachment recess may determine where the visible head sits after installation. This explains why a decorative silhouette is incomplete as a component definition: the raw C360 bar supplies the starting material, while the finished geometry controls both appearance and assembly.
02
Distinguish decorative faces from attachment features
A turned hardware piece often hides its most important interface behind the visible shape. An internal recess, threaded attachment, or locating shoulder should have a clear drawing reference even when the exterior is the main visual concern. Treat the appearance reference and the interface specification as separate information. That allows a reviewer to understand how the piece should look without guessing how it attaches, and prevents a photograph of finished hardware from becoming the entire material request.
03
Keep material identity with small batches
Several small round blanks can be difficult to distinguish once packaging is removed. Link each blank size to its part number and keep the C360 material requirement in that record. If the project mixes brass and copper components, use labels rather than appearance to identify them. State which surfaces may carry temporary identification, especially when the finished part has a visible circular face. A clear receiving list helps preserve the intended material assignment through later machining.
Compare circular brass starting forms
Compare circular brass starting forms
Catalog option
Starting section
Purchasing distinction
C360 brass round bar
Solid circle
A solid blank for the specified finished profile.
Brass round tube
Hollow circle
Tube alloy and specification remain separately defined.
C360 brass square bar
Solid square
Consider when square features are part of the finished design.
PUT THE DIMENSIONS INTO PRACTICE
Example: a four-piece round bar request
Use this illustrative cut line to see how the fields work. It is a dimensional example, not a stock listing or a recommended section for a particular load.
Diameter1 in25.4 mm
Cut length12 in304.8 mm
A 1 in diameter solid bar has an ideal cross-sectional area of π/4, approximately 0.7854 square inches. At 12 in long its volume is approximately 9.425 cubic inches. This is solid stock; there is no inside-diameter or wall dimension.
How the theoretical weight is calculated
Cross-sectional area × cut length × reference density = estimated material weight.
Material in this example
Brass
Reference for this example
C360 grade reference
Density used
8,500 kg/m³
One piece, approximately
2.89 lb / 1.31 kg
Four pieces, approximately
11.58 lb / 5.25 kg
Calculated from ideal geometry and a reference density. Actual section, alloy, tolerances, cutting loss and packaging can change the result. This is not a shipping weight or a load rating.
On your own cut list, add a part reference and quantity to each distinct size. Put extra operations such as holes, miters, threads or finish work on the drawing, then keep that drawing reference with the relevant line.
C360 is the listed free-cutting brass reference. That identifies a material selection for machining discussions; it does not define the final component's tolerances or finish.
Can I assume C360 round bar is suitable for a drinking-water component?
No. This is a leaded brass reference and the family does not certify an end-use application. Specify the required compliant material and documentation instead of inferring suitability.
Should I request exact finished length for a turned brass blank?
Use the raw length required by the machining process, including facing allowance where needed. State separately if the supplied end must meet a finished tolerance.
Why do turned brass parts use an axis as a reference?
Circular features can have different diameters while sharing one centerline. Referencing that axis explains how a head, shoulder, and attachment region relate to one another. Their individual sizes do not establish their alignment, so the axis is part of the finished geometry rather than a raw-material label.
What is the difference between a shoulder and a chamfer on round hardware?
A shoulder is a change in section that can create a locating face. A chamfer is a flat beveled transition at an edge. They play different geometric roles: a decorative edge treatment does not automatically replace the face that determines where the component stops in an assembly.
Why can a blind recess need more explanation than a visible hole?
A blind recess ends within the component, so its bottom geometry and depth are hidden in a surface view. The mating part may depend on those features or on the remaining surrounding material. An outside profile alone cannot describe that internal relationship.
Does a bright turned finish establish the quality of an attachment fit?
No. Appearance concerns the visible surface, while fit depends on the dimensions and geometric relationships at the attachment. A decorative head can look correct even when its hidden interface does not locate properly. Those are separate acceptance questions for the same finished piece.
Should a decorative profile drawing include the hidden attachment?
Yes. The hidden interface can control how the entire piece sits after installation. Show it in section and relate it to the visible profile using consistent references. Keep the decorative sample for appearance, while the drawing explains how the hardware locates and attaches.
How can I reorder a turned brass component without relying on a sample alone?
Preserve the finished drawing, material requirement, accepted finish reference, and revision history. Identify the raw blank separately if you are buying material for another shop. A physical sample is useful for comparison, but its unrecorded details should not be the only definition of the component.
What dimensions do I need to request c360 brass round bar?
Provide diameter, cut length, plus quantity for each size. Use inches or millimeters consistently. Add the required grade, condition, finish and any critical tolerances; attach a drawing for details the standard fields cannot describe.
Turn your specification into a clear request.
Include the material, dimensions, quantity and critical requirements. Availability, supplied condition, cutting and delivery are confirmed in a reviewed quote.
